|
Panasonic EY7202GQW 12-Volt NiMH Cordless Impact Driver | 
 enlarge
| Brand: Panasonic
Category: Home Improvement
Buy New: See price in cart
New (5)
Rating:  13 reviews
Sales Rank: 13767
Media: Tools & Hardware
Batteries Included: Yes
Shipping Weight (lbs): 11.9
Dimensions (in): 6 x 2 x 9
MPN: EY7202GQW
Model: EY7202GQW
UPC: 037988710263
EAN: 0037988710263
ASIN: B0007Y6BT8
Shipping: Eligible for Super Saver Shipping
Availability: Usually ships in 24 hours
| |
| Features:
| • | First Impact Tool with 3 speeds allowing the user to set the proper speed for a specific job | | • | First Impact Tool with an Electronic Clutch, Digital Readout, and Auto Shut-off | | • | First Impact Tool with Tighten (Snug-Up) Function, if the fastener is not fully set release, then pull the trigger again and it will tighen another 1/4, 1/2 or 3/4 turn depending on if it is a low, medium or high torque application | | • | Built in Belt Clip and LED light that turns on when the trigger is pulled a great feature for cabinet installation | | • | Includes Two High Capacity 3.5Ah Ni-MH Battery Packs |
|
| Accessories:
|
| Similar Items:
|
| Editorial Reviews:
Product Description
New 12V Digital Impact Driver EY7202GQW The first impact driver with three speeds and three torque levels. The first impact driver with an electronic clutch, digital readout and auto shut-off. The first impact driver with a tighten (snug-up) feature. No more guess work or ruined materials and fasteners. Set the tool, pull the trigger, and watch it work then shut-off automatically for a flush finish. Want another , , or turn? Use the tighten (snug-up) function for the finish you desire. Torque, Speed / Impact Range - HIGH: 1,060 in.lbs / 0 2,600 rpm / 0 2,800 imp, MEDIUM: 970 in.lbs / 0 2,450 rpm / 0 2,500 imp, LOW: 530 in.lbs / 0 2,200 rpm, 0 2,000 imp. Features galore hex quick change chuck, variable speed, electronic brake, built in belt clip, LED work light, and outer rubber casing for added protection. The EY7202GQW kit includes: digital impact driver, two 3.5Ah Ni-MH batteries, universal charger and molded case.
Amazon.com
With this nifty little tool, you may never use a regular drill to drive screws again. The digital settings are easy to adjust, and an onboard microcomputer senses pressure to prevent you from overdriving and damaging the surface of whatever you are working on. The LED light is a nice touch in low light conditions. It is extremely light weight, but packs enough power to satisfy professionals as well as do-it-yourselfers. The driver won't bog down when pushed to it's limits, it just keeps plugging away, trying to further seat the fastener. Panasonic is a leader in the battery industry and the long battery life of the 3.5 amp packs on this tool are another plus. All in all, this is a super tool - extremely versatile, lightweight, great batteries and charger. --Jodi Johnson
|
| Customer Reviews: Read 8 more reviews...
Impact Driver July 7, 2007
Edward Griner (Millville,NJ,USA)
1 out of 1 found this review helpful
This is a great tool.Panasonic is right on the ball about what works in the construction trades.It is powerful,light,and tough.The batteries last forever. If your thinking about it,this is the one you want.
Fantastic!!! June 8, 2007
WestbrookWoodworks (Montana)
I love this driver! The clutch is very effective. Once you get it adjusted for the density of the wood, it will drive screws to a consistent depth. The half turn feature works quite well if you have a screw that doesn't countersink all the way due to a denser piece of wood. Great battery life, this 12v will drive more screws faster than my 18v drill and is lightweight enough to use all day. The built in flashlight is quite handy as well.
 Framing tool May 25, 2007
B low
1 out of 1 found this review helpful
If you can't drive nails this tool sure beats regular drivers. Drives 3.5"
deck srews easily with no predrilling,{minimal pressure required} but you have to use square drive. Phillips screws strip out quickly and bits die quick, even tho very careful. Square drive will last 5-600 drives on these long fasteners. Battery dies kind of quick tho. Even after several cycles and charging for 24 hours each time you can only frame one 16 foot wall, maybe 70 of this length on one battery. Would be interested in other's experience on this. small, lightweight, overall pretty amazing. clutch actually works. Just improve battery and/or charger.
Is this great or what !?! February 28, 2007
JoBob (Amarillo TX)
2 out of 2 found this review helpful
I was very sceptical even after reading glowing reviews. Have gone from sceptic to advocate since using impact. I already owned a Sears Craftsman 14.4V impact and was quite impressed with it but became interested in the ability to adjust the torque on this tool. Let me say that I LOVE this feature. Even though the instruction manual says not to use it on sheet metal, supposedly because the torque might strip screws, I haven't had any problem. I simply set the torque setting to 1 and the impact setting to Soft and the use the "one shot impact" setting and install whatever. I recently installed the electrical cover plate and front base cover to our new dishwasher. Also installed doors and roller freezer compartment on our new LG bottom freezer fridge and had no problem. Also removed and later installed 5 ash cabinet doors and barely stripped one screw which was probably stripped years ago by builder. Shaved 1/2 inch end of a toothpick, stuck it in the hole and zip, drove it home, snug and no strip. Used lowest setting on torque and impact for these small chores and tool made child's play out of it. Also use a magnetic hex extension to hold screws on bit with no hands(Sears sells one with extra strong magnet, it's great). Drove some 1 3/4 inch screws into some new wood and never got over level 3 on the tourque setting. Just experiment a little with the different torque and impact settings,they are push buttons so no collar or lock ring to fiddle with. This tool makes me look for chances to drive a screw. The manual is typically a little squirlley but the tool is just the opposite. It is serious.
I bought the combo kit on Amazon and the drill is great. I really like the ratcheting action on the keyless chuck.
My eyes have changed a little over time and I love the led light. You can engage it without engaging the driver motor if you use a light touch. This is great for me.
If you have never used an impact driver, the difference between them and drill/drivers for driving screws and fasteners is like night and day. No more stripped screw heads or bits ! Buy it! Love it!
Great Driver January 11, 2007
J. Hanks (Houston, Texas United States)
1 out of 1 found this review helpful
If you drive a lot of screws this is a tool you need. It has the first clutch that works perfect every time and if you need to drive some large screws in tough wood the hammer action will get it done
|
|
|
Copyright 2008 | |
