|
Milwaukee 5615-20 1-3/4-Horsepower BodyGrip Router | 
 enlarge
| Brand: Milwaukee
Category: Home Improvement
List Price: $270.00
Buy New: $133.30
You Save: $136.70 (51%)
New (3) from $133.30
Rating:  15 reviews
Sales Rank: 23548
Media: Tools & Hardware
Shipping Weight (lbs): 8.8
Dimensions (in): 10 x 8.9 x 8.8
MPN: 5615-20-AMZ
Model: 5615-20
UPC: 045242032815
EAN: 0045242032815
ASIN: B00005Q7D6
Shipping: Eligible for Super Saver Shipping
Availability: Usually ships in 24 hours
| |
| Features:
| • | 1-3/4 hp router with Milwaukee's BodyGrip design | | • | Tactile handgrip designed into the base of the router; fast, accurate linear depth adjustment system | | • | Comfortable over-molded rubber grip; patented above-the-table depth adjustment mechanism | | • | Includes two 1-1/8-inch collet wrenches, 1/4-inch collet, 1/2-inch collet, and a carrying case with integral Router Station | | • | Tool weighs 8.8 pounds; limited manufacturer's warranty |
|
| Accessories:
|
| Similar Items:
|
| Editorial Reviews:
Product Description
Includes 1-3/4 Max HP BodyGrip Router - 5615-80, (2) 1-1/8" Collet Wrenches, 1/2" Collet, 1/4" Collet, Product Manual
|
| Customer Reviews: Read 10 more reviews...
I should have purchased the Model 5616 December 12, 2006
L. Pape (Washington State USA)
1 out of 5 found this review helpful
This machine is a very good tool and it did a job I needed to get done with plastic material but it is very loud! It has an aircraft-carrier-catapult start and it takes a lot of time to spin down! I should have purchased the Model 5616 with variable speed and soft start. It's a moot point though because I think I'm getting a Porter Cable Model 893/5 multi-base router kit for Christmas.
P.S.: It's amazing how little attention is being paid to cutting speeds for different materials. Tool makers (i.e., drills, routers) should take a hint from microwave ovens and their programmed cook times for different foods ... if you get the metaphor). We need tools with accurate electronic speed controls delivering constant power.
 Terrific May 22, 2006
Woody2 (NE USA)
Love the BodyGrip and power of this small router. Extremely well built and accurate basic tool. The optional plate allows for use of brass collars. Softstart would be nice, but I knew when I bought it what it had and what it didn't.
Great one hander February 20, 2006
Bobby Stanley (Houston, TX)
1 out of 1 found this review helpful
I bought this tool on clearance from Lowe's. I must say Milwaukee has great customer service and supplied me with the missing wrenches for this tool. I like having the ability to hold the router with one hand with ease. I must agree with another reviewer about it being difficult to get your hand in the strap. I would prefer the PC model with the D handle. This model was on sale for $50.00! I wished the router had a soft start. This router has a lot of torque at start up. Very powerful router. I removed the velcro strap and the handle on that side. It has been a little difficult to get my hand in and I find is so easy just to grab the router without the strap. I removed the handle to allow me to get into tighter spaces. I can always put it back on if I need it.
Terrific router for dove-tailing (and more) October 3, 2005
Victor H. Agresti (Gaithersburg, MD United States)
5 out of 5 found this review helpful
After reading all the non-plunge router reviews I could find, and looking at each model in local stores, several tool features sold me on this unit. It helps living in a large metropolitan area, as numerous local stores sell professional-grade routers.
1. This is the only mid-sized router I could find that is designed to be controllable with one hand, with quick access to the off/on switch using your right thumb. (If you hold the router in your left hand, the switch won't be in the right place for your thumb.) This is important to me, because when routing dovetails, I hold a vacuum hose in my left hand, and the router in my right hand, so a two-hands-needed router won't work.
2. Router bits stay in the precise center of the base, even when bit depth is adjusted. This may sound pretty basic, but this is the only (non-plunge) router I could find where this was true. E.g., in ALL of the units I looked at where height adjusts via the motor assembly screwing into the base, the router bit shaft is hardly ever in the very center after you tighten the motor housing clamp. While this may not be critical for most router applications, it is whenever using template guides. E.g., to make dovetail joints or use door hinge templates.
3. Router is relatively light and easy to handle.
4. Model 5615-21 comes with a well-designed case and a clever built-in removable router base (click on customer photos above). There is no need to remove the bit from the router - as it is protected from damage while sitting right side up on the base, either with the base in the case, or with the base removed from the case. The case provides outstanding tool protection and has extra space around the tool for storage. Model 5615-20 is JUST the router - no case and no router base.
Soft-start was not important, although that would have been a nice plus. In fact, fast stopping of the bit would have been even more useful - i.e., it takes several seconds for the bit to stop after switching the tool to off.
I bought this router primarily to use with a Leigh 24" dovetail jig, although it's used for other purposes. It hasn't been used enough to testify to its longevity, but so far, it's just what the doctor ordered. The micro-adjusting screw is perfect for doing dovetails or door hinge routing, where you're typically moving the bit in or out, but 1/100" at a time. As with any well-designed router, you can set it upside down, because nothing sticks out.
Owning 5 routers of various types, I can assure you that there is no "perfect" router for all purposes. For example, I use a 3 hp plunge unit in a large router table - it's soft-start and variable speed, with plenty of power for those super-large panel door cutters, and bit changing needs but ONE wrench from the table top - because the tool's drive shaft can be locked. This Milwaukee unit needs TWO wrenches (included) to change bits; and while it's amazingly simple to insert or remove bits with the router sitting on a bench, that wouldn't be so if it was under a [router] table. Besides, it would be underpowered and too high-speed (for large bits).
The reviewer whose unit vibrated too much might have had a defective router - mine hardly vibrates at all. If I sit my router flat on a bench (with no bit), and turn it on and let go, it just hums, doesn't wander at all - and runs smooth as silk, although it's hardly quiet.
Since through dovetails need two routers to be set up (for productivity), I'm thinking of buying another one of these...
 Does not hold up November 11, 2004
Robert E. Walker
2 out of 2 found this review helpful
I am a fiish carpenter who uses 4 routers set up with different bits most days. I have owned this router for nearly 2 years and find myself reaching for any other router other than this one. The strap idea is great, however it takes longer to pick it up, get comfortable and go. The height adjustment is also a good idea, but in the everyday world doesnot offer an advantage over other systems, unless you dedicate this to a router table.
My big gripe about this tool is the bearings have failed on me twice in the past nine months. Keep in mind I use this tool only when another router is not available and I have not experienced this problem with my other routers.
|
|
|
Copyright 2008 | |
